Author Archives: Daniel Freitas

09. Remote Temperature and Humidity Sensor for new parents

INTRO The purpose of this project is to allow parents to remotely check both the temperature of their baby and the humidity of the diaper. I used wearable Lilypad technology sewn into a baby blanket. Figure 1 – Electronics in the … Continue reading

Posted in 09. Final Project Reports | 4 Comments

Project Proposal: Remote Temperature and Humidity Sensor for new parents

Intro For my final project I wanted to work with wearable technologies and body sensors. In my mini-project I used a Lilypad Arduino and a temperature sensor to make a heat Sensing Glove. I perceive this technology as being applied … Continue reading

Posted in 08. term project proposals | Leave a comment

07. Mini-Project: Heat Sensing Glove

When the hand is cold it lights the blue LEDs: one LED if temperature is less then 10ºC/50ºF; two LEDs if temperature is between 10ºC/50ºF and 20ºC/68ºF; and three if it is between 20ºC/68ºF and 30ºC/86ºF. If the hand is … Continue reading

Posted in 07. Mini-Project | 2 Comments

05. DC Motors and H-bridge

Code

Posted in 05. DC Motor and H-bridge | Leave a comment

06. Mechanisms and Movement

This machine combines a cam-follower and 3 gears. Sketch Picture Video

Posted in 06. Mechanisms and Movement | 1 Comment

04 In and Outs of Analog

Video Circuit

Posted in 04. Ins and Outs of Analog | Leave a comment

03 Sensing Simple Signals

Video: Arduino Sketch: Ex3 Arduino Sketch: Ex4 Arduino Sketch: Ex5

Posted in 03. Sensing Simple Signals | Leave a comment